Nutanix NCP-NS 시험 개요:
| 인증 벤더: | Nutanix |
|---|---|
| 시험명: | Nutanix Certified Professional Network & Security v6.10 |
| 시험 번호: | NCP-NS v6.10 |
| 시험 형식: | 객관식 단일 답안, 객관식 복수 답안 |
| 지원 언어: | English |
| 자격증 유효 기간: | 2년 |
| 관련 자격증: | Nutanix Certified Professional (NCP) |
| 실제 시험 문항 수: | 75 |
| 합격 점수: | 70% |
| 시험 시간: | 120분 |
| 응시료: | $199 USD |
| 권장 교육: | Nutanix Network & Security Administration (NNSA) |
| 시험 등록: | PSI Exam Scheduling Nutanix Certification Portal |
| 샘플 문제: | Nutanix NCP-NS 샘플 문제 |
| 응시 방법: | 온라인 원격 감독 방식 또는 PSI 시험 센터에서의 현장 응시 |
| 전제 조건: | 권장 요건: 네트워크/보안 분야 2년 경력, Nutanix Flow 사용 경력 6개월 이상; Nutanix Network & Security Administration (NNSA) 교육 이수 |
| 공식 요강 URL: | https://www.nutanix.com/support-services/training-certification/certifications/certification-details-nutanix-certified-professional-network-security |
Nutanix NCP-NS 시험요강:
| 주제 | 소개 |
|---|---|
| 주제 1 |
|
| 주제 2 |
|
| 주제 3 |
|
| 주제 4 |
|
| 주제 5 |
|
참조: https://www.nutanix.com/viewer/content/dam/nutanix/en/resources/datasheets/ds-ebg-ncp-ns.pdf
최신 Nutanix Certified Professional NCP-NS 무료샘플문제
문제 #1
An administrator has configured a VPC with multiple overlay subnets and attached a VPN gateway using IPSec. After enabling Jumbo Frames on the physical network, VMs are still experiencing packet drops.
What is the most likely reason?
A. Jumbo frames are not supported on overlay subnets.
B. MTU on guest VMs exceeds recommended size for IPSec.
C. Floating IP is missing on the VPN gateway.
D. DHCP relay is misconfigured.
문제 #2
Refer to the exhibit.
How should an Application Policy be created whose rules apply only to vNIC1 of VM1?
A. Add Cat:SubnetA as secured entity in the Application Policy.
B. Create an Entity Group with Cat:SubnetA, Cat:SubnetB and Cat:VM1 and then add the Entity Group as Secured Entity to the Application Policy.
C. Create an Entity Group with Cat:SubnetA and Cat:VM1 and then add the Entity Group as Secured Entity to the Application Policy.
D. Add Cat:SubnetA and Cat:VM1 as secured entity in the Application Policy.
문제 #3
An administrator has been tasked with configuring virtual switches and setting the appropriate MTU size for a Nutanix cluster to optimize network performance.
The cluster needs to support high-throughput traffic between VMs and ensure compatibility with external networks. The administrator needs to configure the virtual switches and MTU size to enable jumbo frames while ensuring that all nodes and network components are properly aligned to prevent packet loss or fragmentation.
What is the first step to configure the virtual switches and MTU size in a Nutanix cluster for optimal network performance?
A. Enable multicast filtering on the virtual switches to optimize MTU configuration.
B. Set the MTU size to 1500 on the Nutanix virtual switches and configure a separate VLAN for MTU traffic.
C. Set the MTU size to 1500 on all nodes and virtual switches for compatibility with external networks.
D. Configure the MTU size to 9000 on all nodes and virtual switches, and verify that all physical network switches support jumbo frames.
문제 #4
An administrator is designing a Transit VPC to provide shared corporate services (e.g., DNS) for two tenant VPCs:
VPC-A requires WAN access using NAT.
VPC-B requires WAN access without NAT.
Both VPCs connect to the Transit VPC for shared services hosted on the corporate network.
Shared services residing in the Transit VPC use routed IP addressing for WAN connectivity.
Which two configuration elements should the administrator implement on the Transit VPC? (Choose two.)
A. Associate one No-NAT external VLAN to the Transit VPC router for underlay connectivity.
B. Associate both a NAT and a No-NAT external VLAN to the Transit VPC to support separate egress paths.
C. Create two Overlay external subnets in the Transit VPC: one for VPC-A and one for VPC-
D. Use one Overlay external subnet in the Transit VPC to which both VPCs will connect.
문제 #5
What must an administrator do before disabling the Network Controller?
A. Delete all external subnets and VPCs which are in-use.
B. Delete VLAN Basic Subnets.
C. Convert external subnets into VLAN Basic networks.
D. Once enabled, the Network controller cannot be disabled.
질문과 대답:
| 문제 #1 정답: B | 문제 #2 정답: C | 문제 #3 정답: D | 문제 #4 정답: A,D | 문제 #5 정답: A |














1002 개 고객 리뷰
품질과 가치ITCertKR 의 높은 정확도를 보장하는 최고품질의 덤프는 IT인증시험에 대비하여 제작된것으로서 높은 적중율을 자랑하고 있습니다.
테스트 및 승인ITCertKR 의 덤프는 모두 엘리트한 전문가들이 실제시험문제를 분석하여 답을 작성한 만큼 시험문제의 적중률은 아주 높습니다.
쉽게 시험패스ITCertKR의 테스트 엔진을 사용하여 시험을 준비한다는것은 첫 번째 시도에서 인증시험 패스성공을 의미합니다.
주문하기전 체험ITCertKR의 각 제품은 무료 데모를 제공합니다. 구입하기로 결정하기 전에 덤프샘플문제로 덤프품질과 실용성을 검증할수 있습니다.
